FOCUSRITE ISA ADN2 Dante A/D Card
Expansion Card | Product code:
HN256563
Central Warehouse In Stock 5 pcs
The Focusrtite ISA ADN2 is a dual channel A/D converter with Dante support in the form of an expansion module designed exclusively for Focusrite ISA One preamplifiers.
With the ISA ADN2, the high-end ISA One preamp can be implemented directly into a Dante network, providing a studio-quality preamp to even the most advanced and sophisticated audio networks. The ISA ADN2 is an optional dual-channel A/D card that provides high quality A/D conversion at 24 bit resolution, with a sample rate of up to 192 kHz and a dynamic range of 118 dB.
The card is equipped with a set of connectors for professional use - primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT optical output, and an RCA connector for S/PDIF output. Word Clock inputs and outputs on BNC connectors allow clock synchronization with many external devices. Dante outputs on the card provide ISA One network connectivity to all Focusrite RedNet and Red interface devices, as well as any other Dante-enabled device from hundreds of manufacturers. Measurement and setup can be accessed via RedNet Control software, with routing configured via the Dante Controller. Both RedNet Control and Dante Controller software are included.
With the ISA ADN2, the high-end ISA One preamp can be implemented directly into a Dante network, providing a studio-quality preamp to even the most advanced and sophisticated audio networks. The ISA ADN2 is an optional dual-channel A/D card that provides high quality A/D conversion at 24 bit resolution, with a sample rate of up to 192 kHz and a dynamic range of 118 dB.
The card is equipped with a set of connectors for professional use - primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT optical output, and an RCA connector for S/PDIF output. Word Clock inputs and outputs on BNC connectors allow clock synchronization with many external devices. Dante outputs on the card provide ISA One network connectivity to all Focusrite RedNet and Red interface devices, as well as any other Dante-enabled device from hundreds of manufacturers. Measurement and setup can be accessed via RedNet Control software, with routing configured via the Dante Controller. Both RedNet Control and Dante Controller software are included.
Specifications
- Number of Channels: 2
- Input Ports: Word Clock coaxial BNC
- Output Ports: 2 x RJ45 Dante, AES3, ADAT Toslink, S/PDIF RCA, Word Clock coaxial BNC
- Sample Rate: 24-bit / 192 kHz
Send us your inquiry, our customer support specialists will respond soon. If we find the inquiry useful for other customers, it will be published here.
