LEWITT DTP 640 REX

Thanks to variably controlled dual element technology and fine tuned frequency responses, our flagship among drum microphones, the DTP 640 REX, offers unparalleled and powerful sound that will delight professional drummers and sound engineers alike. The DTP 640 REX is equipped with a high quality dynamic element and a condenser element – the dynamic element ensures accurate reproduction of the bass drum kick, while the condenser element optimally captures the rich low frequency sound of the drum’s shell. In order to guarantee full control over the two elements, they can be separately mixed on their own channels.

Since 2012, the DTP 640 REX offers two more features. The dynamic element emphasizes frequency ranges relevant for the kick drum in the ‘Dynamic Enhanced Frequency Response’ setting switchable right on the microphone, while the condenser element captures the sound neutrally. With ‘Dual Enhanced Frequency Response’, the character of the sound can be shaped even more individually – with this setting, the condenser element focuses on frequencies from 70 to 150 Hz and delivers a full body sound. The dynamic element provides the necessary power by focusing on the range between 3 and 5 kHz.

The combination of these features with the comprehensive tonal freedom of dual-element technology greatly increases the range of use, turning the DTP 640 REX into a universal tool for bass-heavy applications.

Features and Applications

Features

Innovative dual-element design (dynamic and back-electret condenser) accurately captures the sharp attack of the beater as well as the round tonalities of the shell for unrivaled realism 3-position switchable "Enhanced Frequency Response" provides various tailored frequency responses on separate channels for maximum creative freedom Frequency response specifically tuned for kick drum applications and bass instruments 3-position switchable pre-attenuation pad (0 dB, 10 dB, and 20 dB) for handling extremely high sound pressure levels Hardened hexagonal ruthenium-galvanized steel mesh grille to prevent wear and abuse Integrated stand adapter for quick and easy mounting and positioning Corrosion-resistant gold-plated 5-pin XLR output connector Comes in a cardboard box with foam layers; includes DTP 40 Trs cable and DTP 40 Lb artificial leather bag

Top applications

Drums and Percussion // kick drum... Low frequency instruments // double bass, electric bass, kick drum... Live and studio applications

Tech Data

Acoustical operating principle: dynamic, moving coil

Condenser, permanently polarized

Transducer O (dynamic): 31,7 mm

1,25 inch

Transducer O (condenser): 22,4 mm

0,88 inch

Directional pattern: cardioids, condenser and dynamic

Frequency range: 20 ... 16.000 Hz, dynamic

20 ... 20.000 Hz, condenser

EFR, ‘Enhanced Frequency

Response' settings: = // = FFR, ‘Flat Frequency Response’

+ // = Dynamic EFR, ‘Dynamic Enhanced Frequency Response’

+ // + Dual EFR, ’Dual Enhanced Frequency Response’

Sensitivity, = // = FFR: 0,4 mV / Pa (-69 dBV) dynamic

2 mV / Pa (-54 dBV) condenser

Sensitivity, + // = Dynamic EFR: 0,4 mV / Pa (-69 dBV) dynamic

2 mV / Pa (-54 dBV) condenser

Sensitivity, + // + Dual EFR: condenser and dynamic matched at 1 mV / Pa (-60 dBV)

Equivalent noise level: 28 dB-A (IEC 61672-1), condenser, FFR

Dynamic range of mic. amp.: 122 dB-A, condenser

Max. SPL for 0,5 % THD: 150 dB, 0 dB pre-attenuation

160 dB, 10 dB pre-attenuation

170 dB, 20 dB pre-attenuation

Pre-attenuation pad: 10 dB, 20 dB, switchable

Rated impedance: < 500 ohms, dynamic

< 200 ohms, condenser

Supply voltage: 48 V + / - 4 V (IEC 61938)

Current consumption: 2 mA (IEC 61938)

Connector: gold plated 3-pin and 5-pin XLR

Cable: 1,5 m (4,95’) dual shielded Y-cable,

5-pin XLR into two 3-pin XLRs

Dimensions: 71 dia. X 158 mm

2,8 dia. X 6,2 inch

Net weight: 755 g

27,3 oz