Tube Amplifiers
![Laney IRT120H]()
![Laney IRT120H]()
![Laney IRT120H]()
![Laney IRT120H]()
![Laney IRT120H]()
(10)
Bespeco PYC1 Speaker Cable
€8.40
In Stock 1 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
(2)
Bespeco PYC2 Speaker Cable
€10.40
In Stock 2 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
Bespeco PYC5 Speaker Cable
€16.00
In Stock 5 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
(4)
Monster SP2000-S-3 Speaker Cable
€41.00
In Stock 0.9 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
Markbass Super Power 2m JJ Speaker Cable
€47.40
In Stock 2 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
-15% with code SO15
Soundsation WM-PCJJ1 Speaker Cable
€10.80
In Stock 1 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
-15% with code SO15
(1)
Soundsation WM-PCJJ2 Speaker Cable
€12.40
In Stock 2 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
Laney IRT120H
(2)
Tube Guitar Amplifier / HN121654
The IRT series is one of the newest lines in the Laney range. These all-tube machines are designed primarily for fans of harder genres, but you can easily get a nice clean sound, as well as live rock distortion and feel at home with them in the waters of metal hi-gain.
This particular model has 120 watts of power, thanks to four 6L6 tubes. In the preamp you will find four ECC83 type tubes. This power can be delivered to 1x 16 Ohm, 2x 16 Ohm, 1x 8 Ohm, 2x 8 Ohm or 1x 4 Ohm speakers.
On the front panel you will find the input for your input on the far right. The potentiometers are placed here in two rows, the upper one used to control the third, solo, channel, and the lower one to adjust the first, clean, and second, accompaniment, channels. The bottom row, then, contains Clean Volume, Rhythm Gain for adjusting the distortion of the second channel, a common 3-band EQ and Volume. On the top row, there's Pre-Boost, Lead Gain, a 3-band EQ and also Volume. The Pre-Boost can be switched by footswitch and the EQ potentiometer are push/pull to shift the functional frequency or gain. In the master section there are dedicated Dynamics and Watts potentiometers in addition to the Tone and Reverb controls. The former has a big influence on the bass behaviour, while the latter can be used to pull the power down to the 1 Watt level and use the Ironheart quietly at home at night. As for the rear panel of the unit, all the necessary connectors are located here. Firstly, there are five connectors for connecting speakers with different impedances, followed by inputs for connecting footswitches controlling channels, reverb and boost, effect loop input and output, and finally a bias switch between 6L6 and EL34 tubes.
For a relatively simple but very capable machine, the Laney IRT is very capable. You definitely won't get lost with this monster, no matter what kind of music you play.
This particular model has 120 watts of power, thanks to four 6L6 tubes. In the preamp you will find four ECC83 type tubes. This power can be delivered to 1x 16 Ohm, 2x 16 Ohm, 1x 8 Ohm, 2x 8 Ohm or 1x 4 Ohm speakers.
On the front panel you will find the input for your input on the far right. The potentiometers are placed here in two rows, the upper one used to control the third, solo, channel, and the lower one to adjust the first, clean, and second, accompaniment, channels. The bottom row, then, contains Clean Volume, Rhythm Gain for adjusting the distortion of the second channel, a common 3-band EQ and Volume. On the top row, there's Pre-Boost, Lead Gain, a 3-band EQ and also Volume. The Pre-Boost can be switched by footswitch and the EQ potentiometer are push/pull to shift the functional frequency or gain. In the master section there are dedicated Dynamics and Watts potentiometers in addition to the Tone and Reverb controls. The former has a big influence on the bass behaviour, while the latter can be used to pull the power down to the 1 Watt level and use the Ironheart quietly at home at night. As for the rear panel of the unit, all the necessary connectors are located here. Firstly, there are five connectors for connecting speakers with different impedances, followed by inputs for connecting footswitches controlling channels, reverb and boost, effect loop input and output, and finally a bias switch between 6L6 and EL34 tubes.
For a relatively simple but very capable machine, the Laney IRT is very capable. You definitely won't get lost with this monster, no matter what kind of music you play.
Available within 2 weeks
€1,079.00
Price including VAT
FREE shipping
- Possibility of exchange until 31. 1. 2025
- We offer the best price on the market
- Free shipping on purchases over €299.00
- Extended 3-year warranty
- Goods can be returned within 30 days*
- We pay for shipping when you return goods
- You get a bonus with every purchase
Functions
- Controls 3x Volume, 2x Gain, 2x Bass, 2x Middle, 2x Treble, 1x Pre-Boost, 1x Dynamics, 1x Tone, 1x Reverb, 1x Watts
- Reverb Yes
- Effect Processor No
Features
- Power Output 120 W
- Number of Channels 3
- Impedance 16/8/4 Ohm
- Type of Preamp Tubes 4x ECC83
- Type of Power Amp Tubes 4x 6L6
- Effect type Reverb
Inputs and outputs
- Number of Input Ports 1
- Effects Loop Yes
- Headphone Output Port No
- MIDI No
- USB No
- Footswitch Input Port Yes
Dimensions and weight
- Dimensions 271 x 678 x 288 mm
- Weight 23 kg
Accessories
- Footswitch Included Yes
Country of production
- Country of Production China
Similar products
Recommended accessories
(10)
Bespeco PYC1 Speaker Cable
€8.40
In Stock 1 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
(2)
Bespeco PYC2 Speaker Cable
€10.40
In Stock 2 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
Bespeco PYC5 Speaker Cable
€16.00
In Stock 5 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
(4)
Monster SP2000-S-3 Speaker Cable
€41.00
In Stock 0.9 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
Markbass Super Power 2m JJ Speaker Cable
€47.40
In Stock 2 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
-15% with code SO15
Soundsation WM-PCJJ1 Speaker Cable
€10.80
In Stock 1 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
-15% with code SO15
(1)
Soundsation WM-PCJJ2 Speaker Cable
€12.40
In Stock 2 m Jack TS 6.3 mm - straight (M) Jack TS 6.3 mm - straight (M)
Please bear with us, we are loading the data for you...
Please bear with us, we are loading the data for you...
