Logo
Tube Amplifiers

Orange Rockerverb 100H-MkIII (opened)

Unpacked Tube Guitar Amplifier / HN273105
Over the years, Rockerverb guitars have become cult amplifiers, especially in the harder styles of music. The new MKIII series continues this tradition, offering a wide range of sounds from British crunch to distortion typical of modern genres.

The MKIII series gives you even more headroom, more volume, but also more control thanks to the built-in power brakes. The so-called attenuator is located behind the master volume controls and determines when and how the amp should distort the sound after the preamp section. The overall volume can thus be reduced without affecting the distortion characteristics of the amplifier. The power brake can also be switched on and off using the footswitch, so disabling it can be used as a boost.

The clean channel has been redesigned to give the player a crystal and natural sound as well, thanks to the use of a 2-band EQ. The distorted Dirty channel features Volume controls, a 2-band EQ and a Spring Reverb that is "driven" by a 12AT7/ECC81 tube. Also on the front panel we find the attenuator potentiometer, channel switch and half-power switch. The amp is equipped with an effects loop, which I have my own 12AT7/ECC81 tube. The latter is intended for "purists" who want their complete circuit to be pure tube - including the connected effects.

The power of the amp is 100 W (70/50/30 W) and it can handle 1x16, 1x8 or 2x 16 Ohm boxes. In the preamp we find 4 CC83/12AX7 tubes and two ECC81/12AT7 tubes. In the final amplifier there are 4 EL34 tubes.

The new Rockerverb MKIII is an all-rounder for modern guitarists looking for an honest sound and total attention to detail.
Rate the description of this product
In Stock
Immediate Dispatch All delivery options
€2,123.00
€1,953.00
Price including VAT
FREE shipping
Functions
  • Controls 2x Volume, 2x Bass, 1x Middle, 2x Treble, 1x Gain, 1x Spring Reverb, 1x Attenuator
  • Reverb Yes
  • Effect Processor No
Features
  • Power Output 100 W
  • Number of Channels 2
  • Impedance 16/8 Ohm
  • Type of Preamp Tubes 4x ECC83/12AX7, 2x ECC81/12AT7
  • Type of Power Amp Tubes 4x EL34
  • Effect type Reverb
Inputs and outputs
  • Number of Input Ports 1
  • Effects Loop Yes
  • Headphone Output Port No
  • MIDI No
  • USB No
  • Footswitch Input Port Yes
Dimensions and weight
  • Dimensions 550 x 270 x 280 mm
  • Weight 24.8 kg
Accessories
  • Footswitch Included No
Country of production
  • Country of Production United Kingdom
I have a comment about the product description/parameters
Similar products
Recommended accessories












Please bear with us, we are loading the data for you...
Please bear with us, we are loading the data for you...
Similar phrases
Categories
Brands