In the preamp you'll find a 12AX7A tube, which adds fullness to the bass sound and provides a nice, warm sound. The amp has a built-in compressor for dynamics control and a special distortion circuit that is controlled by the Drive potentiometer. In addition, you can use the Brite switch to add clarity to the higher frequencies and use the Mute switch to mute the sound from all outputs.
On the front panel you'll find a 6.3 mm Jack input for passive and active instruments, whose input sensitivity you can easily adjust using the Gain potentiometer. There's also a headphone output and a 3.5mm Jack input for external players.
On the rear, there's an XLR Direct output with ground switching and Post/Pre EQ for easy connection directly into a PA or mix. There's also a tuner output, an effects loop and, of course, speaker outputs - Jack and Speakon.
Specifications
- Power Output: 500 W
- Impedance: 4 Ohm
- Controls: Drive, Compressor, Gain, Bass, Shape, Frequency, Treble, Master
- Number of Channels: 1
- Limiter: No
- Compressor: Yes
- Effect Processor: No
- DI Output: Yes
- Effects Loop: Yes
- Headphone Output Port: Yes
- MP3/Line In: Yes
- Footswitch Input Port: No
- Footswitch Included: No
- Type of Preamp Tubes: 1x 12AX7
- Dimensions: 355 x 270 x 73 mm
- Weight: 3.6 kg
- Country of Production: China