The Origin 50H is a single-channel amplifier with a maximum output of 50 watts, which can be attenuated with the front-panel Output switch. Powerstem technology guarantees the same high quality sound even at lower power levels. The proven combination of preamp/poweramp tubes gives the amplifier a typical British sound. A three-band equalizer with an added Tilt control for more detailed high-frequency adjustments is used to modify it. Thanks to the Pull Boost function, i.e. push/pull of the Gain control, you can increase both the volume and gain of the machine and take the sound all the way back to the waters of 80s hard/rock.
The lack of built-in effects and higher gain is compensated by the ability to connect external pedal effects via the effects loop input/output, which all Marshall Origin machines are more than comfortable with. On the rear panel you'll also find a footswitch input, three outputs to external speakers with 8 and 16 Ohm impedances, and a DI output with speaker emulation for direct connection of the machine to a mixer. A two-pin footswitch is included (controlling the Gain Boost and effects loop functions).
Specifications
- Power Output: 50 W
- Number of Channels: 1
- Impedance: 16/8 Ohm
- Number of Input Ports: 1
- Controls: Master, Presence, Bass, Middle, Treble, Tilt, Gain (Pull Boost)
- Type of Preamp Tubes: 3x ECC83
- Type of Power Amp Tubes: 2x EL34
- Reverb: No
- Effect Processor: No
- Effect type: N/A
- Effects Loop: Yes
- Headphone Output Port: No
- MIDI: No
- USB: No
- Footswitch Input Port: Yes
- Footswitch Included: Yes
- Dimensions: 577 x 228 x 225 mm
- Weight: 11.8 kg
Related products
-
BESPECO PYC2
Speaker Cable
€10.40
-
BESPECO PYC5
Speaker Cable
€14.60
-
MARKBASS Super Power 1m JJ
Speaker Cable
€37.90
-
MARKBASS Super Power 2m JJ
Speaker Cable
€43.90
-
SOUNDSATION WM-PCJJ2
Speaker Cable
€12.40