This particular model has 120 watts of power, thanks to four 6L6 tubes. In the preamp you will find four ECC83 type tubes. This power can be delivered to 1x 16 Ohm, 2x 16 Ohm, 1x 8 Ohm, 2x 8 Ohm or 1x 4 Ohm speakers.
On the front panel you will find the input for your input on the far right. The potentiometers are placed here in two rows, the upper one used to control the third, solo, channel, and the lower one to adjust the first, clean, and second, accompaniment, channels. The bottom row, then, contains Clean Volume, Rhythm Gain for adjusting the distortion of the second channel, a common 3-band EQ and Volume. On the top row, there's Pre-Boost, Lead Gain, a 3-band EQ and also Volume. The Pre-Boost can be switched by footswitch and the EQ potentiometer are push/pull to shift the functional frequency or gain. In the master section there are dedicated Dynamics and Watts potentiometers in addition to the Tone and Reverb controls. The former has a big influence on the bass behaviour, while the latter can be used to pull the power down to the 1 Watt level and use the Ironheart quietly at home at night. As for the rear panel of the unit, all the necessary connectors are located here. Firstly, there are five connectors for connecting speakers with different impedances, followed by inputs for connecting footswitches controlling channels, reverb and boost, effect loop input and output, and finally a bias switch between 6L6 and EL34 tubes.
For a relatively simple but very capable machine, the Laney IRT is very capable. You definitely won't get lost with this monster, no matter what kind of music you play.
Specifications
- Power Output: 120 W
- Number of Channels: 3
- Impedance: 16/8/4 Ohm
- Number of Input Ports: 1
- Controls: 3x Volume, 2x Gain, 2x Bass, 2x Middle, 2x Treble, 1x Pre-Boost, 1x Dynamics, 1x Tone, 1x Reverb, 1x Watts
- Type of Preamp Tubes: 4x ECC83
- Type of Power Amp Tubes: 4x 6L6
- Reverb: Yes
- Effect Processor: No
- Effect type: Reverb
- Effects Loop: Yes
- Headphone Output Port: No
- MIDI: No
- USB: No
- Footswitch Input Port: Yes
- Footswitch Included: Yes
- Dimensions: 271 x 678 x 288 mm
- Weight: 23 kg
- Country of Production: China
Related products
-
BESPECO PYC1
Speaker Cable
€8.40
-
BESPECO PYC2
Speaker Cable
€10.40
-
BESPECO PYC5
Speaker Cable
€16.00
-
MARKBASS Super Power 1m JJ
Speaker Cable
€37.90
-
MARKBASS Super Power 2m JJ
Speaker Cable
€43.90
-
SOUNDSATION WM-PCJJ1
Speaker Cable
€10.80
-
SOUNDSATION WM-PCJJ2
Speaker Cable
€12.40