ADJ Fog Fury Jett

ADJ's Fog Fury Jett is a high-speed vertical fog maker that adds color to the fog from twelve 3W RGBA LEDs. New advances in ADJ heater technology allow the Fog Fury Jett to blow dry, uniform clouds of fog 7 feet into the air. It has a special heating element design that uses oil to transfer through the ducts, preventing clogging and blockage. It also features a high performance pump system to ensure optimum output. The generator uses ADJ's ETS (electronic temperature sensing) technology to ensure optimum heat levels without the need for preheating between mist blows.

The Fog Fury Jett can be used vertically or horizontally. The reservoir can be mounted on the front or back of the unit so that the generator can face up or down. The Fog Fury Jett comes with the ADJ FFJWR wireless controller.

Technical Specifications:

- Automatic disconnect circuit protects the pump in the event that the fluid reservoir becomes empty.

- Special heating element design using an oil transfer system through the piping minimizes the possibility of clogging and blockage

- 3 operating modes: manual, remote control or DMX control

- 4 DMX channels

- Four-button control panel and LCD display on rear panel

- Three-pin DMX XLR inputs/outputs

- Handy carrying handle

- Low fluid level indicator on the back

- Reservoir can be mounted from the front or back so the unit can be pointed up or down

- Supplied accessories: ADJ FFJWR - wireless control

- Power: IEC AC input

- Safety eye on base

- Use only high quality water based fogging fluid

- Light source: 12 pcs of 3W LEDs (3 red, 3 green, 3 blue and 3 amber LEDs)

- Heating element: 650 W

- Voltage: AC 120 V, 230 V or 240 V, 50/60 Hz (not switchable)

- Power consumption: 680 W (full power)

- Dimensions (L x W x H): 397 x 302 x 191 mm

- Weight: 7.1 kg