ADJ's Fog Fury 3000 is a professional DMX fogger with the power
1500 W, which uses the latest technological innovations. It has a special heating element design that uses oil to transfer through the pipes, preventing clogging and blockages. It is also equipped with a high-performance pump system to ensure optimum output. The producer uses ADJ's ETS (Electronic Temperature Sensing) technology to ensure optimum heat levels so that no preheating is needed between mist blowouts.
In addition, the Fog Fury 3000 has handy features such as an LED heat indication system that changes colour depending on whether the maker is heating up, ready for use or has a low level of fog fluid. In addition, it has a built-in DMX control with a digital LCD display and 3 buttons on the rear panel that can be used to control 3 operating modes: manual mode, DMX or the built-in remote timer.
The Fog Fury 3000 can produce 595 m3 of fog per minute, has an external 5 litre tank and takes 8 minutes to warm up to operating temperature. This fogger uses only water-based fogging fluid.
Specifications
- Professional 1500W DMX fogger
- High-performance pump ensures optimum output
- Utilizes ADJ's ETS (Electronic Temperature Sensing) technology to continuously provide the optimum heat level so that no preheating is required between fog blows.
- Automatic disconnect circuit protects the pump in the event that the fluid reservoir becomes empty
- Special heating element design using an oil transfer system through the piping minimizes the possibility of clogging and blockage
- Warm-up LED indicator system: red = warming up, green = ready to use, flashing = empty reservoir
- 3 operating modes: manual, timer or DMX control
- 3 DMX channels
- 3-button DMX LCD display on rear panel
- 3-pin DMX XLR inputs/outputs
- Heating element: 1500 W
- Fog output 595 (m3/min)
- Warm-up time: 8 min
- External liquid tank: 5 litres
- Support bracket for hanging on wall or structure
- Practical carrying handle
- Power consumption: max. 1600 W
- Power supply: AC 120 V/60 Hz or 230 V/50 Hz (non-switchable)
- Dimensions (L x W x H): 476x301x353 mm
- Weight: 11.9 kg
- Use only high quality water-based fogging fluid
Specifications are subject to change without notice.
1500 W, which uses the latest technological innovations. It has a special heating element design that uses oil to transfer through the pipes, preventing clogging and blockages. It is also equipped with a high-performance pump system to ensure optimum output. The producer uses ADJ's ETS (Electronic Temperature Sensing) technology to ensure optimum heat levels so that no preheating is needed between mist blowouts.
In addition, the Fog Fury 3000 has handy features such as an LED heat indication system that changes colour depending on whether the maker is heating up, ready for use or has a low level of fog fluid. In addition, it has a built-in DMX control with a digital LCD display and 3 buttons on the rear panel that can be used to control 3 operating modes: manual mode, DMX or the built-in remote timer.
The Fog Fury 3000 can produce 595 m3 of fog per minute, has an external 5 litre tank and takes 8 minutes to warm up to operating temperature. This fogger uses only water-based fogging fluid.
Specifications
- Professional 1500W DMX fogger
- High-performance pump ensures optimum output
- Utilizes ADJ's ETS (Electronic Temperature Sensing) technology to continuously provide the optimum heat level so that no preheating is required between fog blows.
- Automatic disconnect circuit protects the pump in the event that the fluid reservoir becomes empty
- Special heating element design using an oil transfer system through the piping minimizes the possibility of clogging and blockage
- Warm-up LED indicator system: red = warming up, green = ready to use, flashing = empty reservoir
- 3 operating modes: manual, timer or DMX control
- 3 DMX channels
- 3-button DMX LCD display on rear panel
- 3-pin DMX XLR inputs/outputs
- Heating element: 1500 W
- Fog output 595 (m3/min)
- Warm-up time: 8 min
- External liquid tank: 5 litres
- Support bracket for hanging on wall or structure
- Practical carrying handle
- Power consumption: max. 1600 W
- Power supply: AC 120 V/60 Hz or 230 V/50 Hz (non-switchable)
- Dimensions (L x W x H): 476x301x353 mm
- Weight: 11.9 kg
- Use only high quality water-based fogging fluid
Specifications are subject to change without notice.
Specifications
- Input: 1500 W
- Output/Power: 595 m³/min.
- Reservoir volume: 5 l
- Warm-up Time: 8 min.
- Number of DMX Channels: 3
Send us your inquiry, our customer support specialists will respond soon. If we find the inquiry useful for other customers, it will be published here.
Related products
-
CHAUVET FJU
Refill
€24.50