The Peavey TransTube series features special technology that allows these transistor combos to emulate the sound and "feel" of full tube amplifiers as closely as possible. The uniqueness of this technology is shown by the fact that 3 patents are used to protect it. Thanks to it, TransTube offers a very wide range of tones that respond well to playing dynamics, with plenty of distortion and proper compression in the final amplifier.
BANDIT 112S
This combo has 80 watts of power and is equipped with a 12-inch Blue Marvel speaker. This, together with the two-channel preamplifier, makes it especially suitable for playing in the rehearsal room or on club stages. In addition, it is possible to connect an external loudspeaker, with which the power output rises to 100 W.
The controls are located on the front panel. There, just behind the two inputs with different sensitivity, you will find the volume potentiometer of the clean channel, followed by a 3-band equalizer consisting of Low, Mid and High potentiometers, in addition to which the clean channel can be switched between Vintage, Classic and Warm modes. The distortion channel is controlled by Pre-Gain and Post-Gain and of course also by the 3-band EQ, for this channel you can work with Classic, Modern and High Gain modes. The Reverb and Boost controls are located in the master section of the unit.
On the rear panel there is a footswitch input that can be used to switch channels and activate the Boost function, a headphone output and a DI output with speaker simulation, which is suitable for recording or playing directly into the PA.
Specifications
- Power Output: 80 W
- Speaker: 1x 12 "
- Number of Channels: 2
- Number of Input Ports: 2
- Controls: Volume, Pre-Gain, Post-Gain, 2x Low, 2x Middle, 2x High, Reverb, Boost,
- Speaker type: Blue Marvel
- Reverb: Yes
- External Speaker Cabinet Output Port: Yes
- Effect Processor: No
- Effect type: Reverb
- Effects Loop: Yes
- Headphone Output Port: No
- MP3/Line In: No
- Battery Operated: No
- MIDI: No
- USB: No
- Footswitch Input Port: Yes
- Footswitch Included: No
- Dimensions: 400 x 720 x 606 mm
- Weight: 18.1 kg